ECO Series Asphalt Mixers

  • fully enclosed structure
  • possibility to use on sites with maximum environmental requirements
  • Best technical and operational characteristics on the market
  • aesthetic appearance.

01 The ECO series

The ECO series allows the use of equipment on sites where maximum compliance with environmental requirements is required. This is achieved due to the special, completely closed, design and optimization of the functional structure of the entire asphalt meshing plant.

The external sealed part of the main unit and the dust collectors at each level exclude the release of dust and waste gases, which improves the environmental performance of the entire ACS.

The ECO series AMP can have a semi-enclosed and closed type design, characterized by a degree of equipment sealing. The semi-enclosed design uses a unique sliding door system on the outside of the main unit, which makes it more convenient to operate. Each major large unit has a built-in individual regeneration and cleaning system.

The ECO Series factories allow to operate even in specially protected natural areas, where other types of industrial equipment

420 t/h

maximum performance

   0 %

dust emission in atmosphere

1200 m2

filtration area

02 Benefits

Advantages of ECO series plant:

03 package contents

ECO series units:

Mixer

The mixing unit is an important element in an asphalt mixing plant, the quality of which directly affects the quality of the asphalt concrete produced. It consists of a mixer in which the ABS ingredients are mixed, as well as a system for feeding and dosing materials. It is intended for transportation of heated sand and crushed stone to the screen, sorting and dosing of stone materials, dosing of bitumen, mineral powder, dust, preparation of asphalt concrete mixture and unloading it into vehicles or storage hopper.

Power supply unit

The power unit is responsible for feeding the components of the asphalt mixture into the Tumble dryer. It consists of several elements: feeding silo with feeders (designed for storage and dosing of asphalt mixture components, such as crushed stone, sand, etc.); conveyors (used to transport components from feed bins to a drying drum); feeders (provide accurate dosing of each component of the asphalt mixture, which allows you to get a quality product).

Dust cleaning system

The system includes a bag filter unit of mineral powder and dust.

The bag filter is a unit in a dust-protected housing in which the sleeves of the Nomex DuPont filter material are mounted. The air is filtered by the smoke and the passage of dusty gases through the filter material of the bag. The sleeves are regenerated (the accumulated dust layer is dropped from the filters into the hopper) by means of flaps which open by the pneumatic cylinders above the filters and by the exhaust pipe being pulled through the purge channel.

Bitumen storage

Designed for storing and heating bitumen. Available in horizontal and vertical design. Has different volume: from 20 to 100 m3.

Each container has thermal insulation, register system, filling indication, technological manholes. Thermal oil is used to heat the storage, which improves the quality of bitumen preparation by avoiding overheating and coking. The oil is heated to the desired temperature by means of a heater of a liquid heat transfer medium. At the customer’s request, the heating system in the tanks can be carried out with the help of electric heating elements.

Tumble dryer

The drying drum together with the furnace and dust collector with bag filters is part of the integrated drying system. Designed for drying and heating stone materials to the temperature necessary for the preparation of the mixture. The TTM design office has selected the optimal linear dimensions of the combustion chambers of drying drums, the capacity of burners, which ensures the production of dried and warmed material even in high humidity conditions.

The barrel and blades are made of boiler steel, bandages and support rollers using forging technology. The drum cigar is insulated with aluminosilicate heat-insulating cotton and is covered with stainless steel plates. This exterior finish reduces heat loss, is efficient, environmentally friendly and durable.

Vibration screen

Vibration screen is another important element of the asphalt mixer, which is used to separate stone materials into different sizes. The screen consists of several layers of screens, each of which has holes of a certain diameter. Stone materials are loaded into the top of the rumble and pass through all tiers where they are divided into factions. The resulting fractions are sent to the respective bunkers for further use in the asphalt mixing process.

The APC TTM is equipped with a 4-,5- or 6-fraction vibration screen, which is developed according to the European standard with two WAM vibrators (Italy), braided sieves and pre-tensioners. Such a design significantly increases the life of the unit, eliminates the sagging of screens, increases the quality of dispersion. It’s possible to work without the vibration screen.

Inert material dispenser, bitumen dispenser, powder and dust dispenser

The Hopper

The hopper is a special tank designed to store the finished asphalt concrete mixture.

The hopper is of two types and consists of 2 and 3 compartments for different asphalt brands: - tower type with bunker capacity from 30 to 200 tons - removable type with a capacity of 50 to 200 tons

The equipment of the material storage bunker is located in the lower part of the modular design. The equipment occupies a small area, transportation and installation are optimized, and environmental-saving equipment is more convenient.

Burner

The TTM burner is a development of our factory. The burner is designed for use in a specific drying drum. This allows us to achieve maximum efficiency. What we’ve achieved is that the fuel burns completely, giving all the energy to dry the inert materials. The burner control system is integrated into the AMP control system.

The TTM factory produces liquid, gas and combined burners. All gas equipment has been certified in the Russian Federation. Due to the fact that fuel quality is often below the stated standards, our factory conducted a study, on the basis of which 4 patents were protected and the design of the burner was improved.

Operator's cabin

The operator’s cabin, in which the control units are located, is simple and concise, well thought out and as effective as possible. The cabin itself is made of sandwich panels, providing excellent heat and noise insulation, as well as protecting operators and equipment from dust intrusion. On three sides the cabin is equipped with sound and heat-tight wide windows that provide excellent visibility. In this case, the working space and the control cabinet itself are located in different areas, between which are installed insulating doors, safety and locking devices to minimize risks in case of improper operation. Both rooms are air-conditioned.

04 Specifications

Characteristics of Universal series plants:

ECO 600 ECO 800 ECO 1000
Performance, t/h 48 64 80
Power supply unit, m3 3 x 8 4 x 8 5 x 8
Tumbler, mm 1740 x 4680 1740 x 4680 1750 х 7000
Burner capacity, MVt 4.6 5.8 7.0
Exhausters’ power, kVt 45 45 55
Vibrators’ power, kVt 2 х 1.7 2 х 1.7 2 х 2.6
Vibration screen – number of fractions 3 4 4/5
Capacity of bitumen batcher, kg 100 100 150
ECO 1200 ECO 1500 ECO 2000
Performance, t/h 100 120 160
Power supply unit, m3 5 x 8 5/6 x 8 6 x 8 or
6 x 15
Tumbler, mm 1750 x 7000 1950 x 8000 2250 х 9000
Burner capacity, MVt 8.2 10.5 14.0
Exhausters’ power, kVt 75 90 110
Vibrators’ power, kVt 2 х 2.9 2 х 2.9 2 х 4.5
Vibration screen – number of fractions 5/6 5/6 5/6
Capacity of bitumen batcher, kg 150 200 300
ECO 2500 ECO 3000 ECO 4000
Performance, t/h 200 240 320
Power supply unit, m3 6 x 8 6 x 15 6 x 15
Tumbler, mm 2500 x 10000 2500 x 10000 2700 x 12000
Burner capacity, MVt 21.1 21.1 27.5
Exhausters’ power, kVt 110 160 185
Vibrators’ power, kVt 2 х 4.5 2 х 7 2 х 2.2
Vibration screen – number of fractions 6 6 6
Capacity of bitumen batcher, kg 300 450 600

05 Gallery

ECO Series plants in operation:

Choose the optimal equipment

Get a free consultation from experts! We will help you choose the optimal equipment, taking into account your requirements and budget. Leave your contact details right now and our specialists will contact you as soon as possible. Trust the experience and professionalism of our team for the successful implementation of your project!